Avital 5303 manual Disarming without a transmitter

nience, in case the system is accidentally triggered.

➜

Disarming without a transmitter

If your remote transmitter is lost or damaged, you can manually disarm your vehicle security system. To disarm the system without a transmitter, you must have the vehicle's ignition key and know where the Valet® switch is located. Be sure to check with your installer at the time of installation for both the location and the preset response (1-5 presses) of the Valet® switch.

To disarm the security system, turn the ignition to the ON posi- tion. Press the Valet button the

preset number of times (one to

DRW-35

five times) within 15 seconds. After five seconds, the system will disarm. If the system does not disarm, you may have waited too long; turn the ignition off and on and try again.

Location of Valet Button_________________________________

Number of Presses_____________________________________

Important! The Valet button can be programmed to respond to 1-5 presses for the disarm function. You must check with the installer to verify the programming for your individual unit.

16 © 2008 Directed Electronics — All rights reser ved