To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode.
To enter or exit Valet Mode using the transmitter:
1.Open any vehicle door.
2.Press 
.
3.Press 
.
4.Press 
again.
The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode.
➜
Remote start
This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the ve- hicle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle.
Important! (1) Never remote start your vehicle when the keys are in the ignition, except when performing Valet
18 | © 2008 Directed Electronics — All rights reser ved |
