Chapter 2: Port Access and Configuration Examples | 23 |
|
|
Last login: Tue Oct 2 13:09:04 2007 on :0
Linux
6GNU/Linux
#
Manage Power for a Device Connected to an Outlet on a PDU
See power_cycle, power_off and power_on on page 12 for how an administrator or any authorized user can manage power on PDU outlets when the PDU is connected to a port that is enabled and configured with the Power Profile.
Port Configuration Examples
The following examples show how an administrator can configure a port when a device console is connected, assign the CAS profile, configure a port that is connected to a PDU and assign the Power Profile.
To set up a console access service (CAS) port:
1.Log onto the CLI as an administrator.
2.Enter cd followed by the parameters shown to select the port (port 1 is used as an example).
3.Enter show to view the status and serial profile of port 1.
port_settings/
4.Type cd then press Tab Tab to view the port_settings option.
5.Enter cd port_settings to navigate to the Port_Settings level to configure port 1.
6.Type set then press Tab Tab to view the set options.
7.Type set port_settings then press Tab to view the options for the Port_Settings level.