Chapter 3: Basic Operations

15

Figure 3.2: Configure Cascade Switches Dialog Box

7.When you reach the final page of the Wizard, click Finish to exit the Wizard and return to the main window. Your appliance should now appear in the Unit Selector pane.

To manually install a new appliance with no assigned IP address:

1.Select File - New - AutoView 1000R/2000R from the AVWorks Explorer menu. -or-

Click the New Appliance task button. The New Appliance Wizard appears. Click Next to continue.

2.You are prompted to indicate if the AutoView 1000R/2000R has an assigned IP address. Click No and then click Next.

3.The Network Address window appears. Type the IP address, subnet mask and gateway that you want to assign to the unit and click Next.

4.The Select AutoView 1000R/2000R window appears, prompting you to select the unit to add from the list of new appliances that were found. Select the unit and then click Next.

5.The Configuring AutoView 1000R/2000R window indicates whether the IP information was successfully configured. If the configuration was successful, AVWorks will search for the new appliance as well as all AVRIQs and server names associated with it. Click Next.

6.The Configure Cascade Switches dialog box appears if AVWorks detects an