Axis Communications user manual LED Indicators, AXIS 225FD - Product Features

AXIS 225FD - Product Features 7

Power connector block - for connection of a power supply. See Power connections, on page 41

I/O terminal connector - The I/O terminal connector provides the physical interface to one solid state relay output, two digital inputs, RS-485/422 and GND. For more information, see Unit Connectors, on page 38.

Network connector - The AXIS 225FD connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 225FD via PoE (Power over Ethernet). The camera also negotiates the correct power level when using PoE.

Serial Number - This number is used during installation.

Control Button - This button is used during the installation using the AXIS Internet Dynamic DNS Service (see the Installation Guide) or to restore the factory default settings, as described in Advanced, on page 36.

LED Indicators

After completion of the startup and self test routines, the multi-colored Network, Status, and Power LED indicators flash as follows:

	Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.
Network	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.
	Red	Flashes rapid red, together with the Status indicator, for hardware error.
	Unlit	No connection.
	Green	Shows steady green if the connected power supply can deliver the correct voltage for
Heater		the heater (12V DC min 20W or 24V AC min 25VA).
	Red	Shows steady red if the connected power supply cannot deliver the correct voltage.
	Green	Shows steady green for normal operation. Can be configured to flash green at intervals
		whenever the camera is accessed. See the online help for more information.
Status	Amber	Shows steady amber during reset to factory default or when restoring settings.
	Red	Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 44).
		Rapid flash, together with the Network indicator, for hardware error.
	Unlit	When configured for “no flash” on camera access.
Power	Green	Normal operation.
	Amber	Flashes green/amber during firmware upgrade.