2About This Document

This manual is intended for administrators and users of the AXIS 241Q/241S Video Server, and is applicable for software release 4.20. It includes instructions for installing, using and managing the AXIS 241Q/241S on your network. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems would also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required. See also the product’s online help, available via the Web-based interface.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the product.

Important! - Indicates a hazard that can seriously impair operation.

Do not proceed beyond any of the above notices until you have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.

This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.

Legal Considerations

Camera surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) MPEG-4 decoder license. To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

Europe - This digital equipment fulfills the

requirements for radiated emission according to limit B of EN55022/1998, and the requirements for immunity according to EN55024/1998 residential, commercial, and light industry.

Liability

Every care has been taken in the preparation of this manual; Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Trademark Acknowledgments

Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN Manager, Linux, Macintosh, Microsoft, Mozilla, Netscape Navigator, OS/2, UNIX, Windows, WWW are registered trademarks of the respective holders. QuickTime™ is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Axis Communications AB is independent of Sun Microsystems Inc. UPnP™ is a certification mark of the UPnP™ Implementers Corporation.

Support Services

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and firmware updates

find answers to resolved problems in the FAQ database. Search by product, category, or phrases

report problems to Axis support staff by logging in to your private support area

visit the Axis Support Web at www.axis.com/techsup/

Safety Notice - Battery Replacement

The AXIS 241Q/241S uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC). This battery will, under normal conditions, last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when battery replacement is required.

The battery should not be replaced unless required!

If the battery does need replacing, observe the following points:

Caution!

Danger of Explosion if battery is incorrectly replaced

Replace only with the same or equivalent battery, as recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

AXIS 241Q/241S User’s Manual

Revision 2.1

Dated: March 2005

Part No: 24241

Copyright© Axis Communications AB, 2004-2005

Page 2
Image 2
Axis Communications 241S, 241Q user manual About This Document

241Q, 241S specifications

Axis Communications is a leading provider of network video solutions, renowned for its innovative products designed for various surveillance applications. Among their range of offerings, the Axis 243Q, 247S, 241S, Q74011, and 241QA stand out for their impressive features, advanced technology, and robust characteristics tailored to enhance security and monitoring.

The Axis 243Q is a high-performance network camera that excels in delivering exceptional video quality. With a resolution of up to 2048x1536 pixels, it supports high-definition video streaming, ensuring that even the smallest details are captured with clarity. This camera is equipped with Axis’ unique Lightfinder technology, which enables superior low-light performance, making it ideal for surveillance in poorly lit environments. Additionally, it features multiple compression formats, including H.264 and Motion JPEG, which help to optimize bandwidth and storage requirements.

The Axis 247S is a compact and versatile network camera that incorporates a seamless design suitable for various interior settings. It boasts a dual stream capability, meaning it can transmit two video streams simultaneously, which can be tailored for different resolutions and frame rates. This feature is particularly beneficial for resource management, allowing users to view lower-resolution streams remotely while saving storage space. Furthermore, the 247S’s built-in audio support allows for two-way communication, enhancing security collaboration.

The Axis 241S network camera is designed for reliable monitoring and high-quality video surveillance in both indoor and outdoor applications. With its weather-resistant housing, it excels in challenging environmental conditions. This camera offers multiple lens options and has infrared illumination capabilities, allowing for night-time surveillance without compromising visibility. The 241S's Power over Ethernet (PoE) support simplifies installation by allowing the camera to receive power and data through a single cable.

For a more advanced solution, the Axis Q74011 Video Encoder facilitates the integration of analog cameras into IP networks seamlessly. It converts analog video signals into digital IP streams, enabling the incorporation of traditional cameras into modern network infrastructures. This versatility allows businesses to upgrade their surveillance systems incrementally without having to replace existing equipment fully.

Lastly, the Axis 241QA camera combines the advantages of image quality with intelligent video analytics. It incorporates advanced algorithms for motion detection, line crossing, and object removal, enhancing monitoring efficiency. The camera’s lens is designed for up to 30 frames per second at full resolution, providing smooth and fluid video for critical surveillance applications.

In summary, the Axis 243Q, 247S, 241S, Q74011, and 241QA collectively represent Axis Communications' dedication to innovation, quality, and user-centric design. With various features such as high-resolution video streaming, adaptability to diverse environments, and advanced analytics, these models cater to a wide range of security needs across various sectors.