AXIS 243Q Blade - Pan Tilt Zoom 31
The order of priority for taking control of the queue is as follows:
1.Administrators - An administrator takes over PTZ control regardless of who is currently first in queue. The administrator will be removed from the queue 60 seconds after their last PTZ control command.
2.Event - The AXIS 243Q Blade can be set up to take control of the queue and move to a specific position for 20 seconds when triggered by an alarm. The event will immediately be placed first in the queue, except when an administrator is in control. For more information, see Triggered Event, on page 33.
3.Operator - Same as administrator, but with lower priority.
4.Guard Tour - A guard tour has PTZ control for an indefinite period of time. It may be overridden by; Operator, Event or administrator. Guard Tour will resume when higher priority groups leave the queue. For more information see Guard tour, on page 29.
5.Viewer - Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed to the next viewer in queue.
Note: In order to identify different users in the viewer group, cookies must be enabled on the client.
Using PTZ on video inputs 2-4
Although the AXIS 243Q Blade supports an
1.Configure PTZ on video input 1 and install the required PTZ driver. This step is always required, whichever video input you intend to use for PTZ, and is described in detail in Installing PTZ devices, on page 25. Refer also to
2.Repeat this procedure and install the same device driver on the other video input(s) you wish to use PTZ on.
3.Enter the same Authentication key as configured for video input 1. This will prevent unauthorized access to the
PTZ devices on inputs
