About This Document

This manual is intended for administrators and users of the AXIS 240Q Video Server, and is applicable for firmware release 4.30. It includes instructions for using and managing the AXIS 240Q on your network. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems would also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required. See also the product’s online help, available via the Web-based interface.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the product.

Important! - Indicates a hazard that can seriously impair operation.

Do not proceed beyond any of the above notices until you have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.

This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.

Legal Considerations

Camera surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) MPEG-4 decoder license. To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

Canada - This device complies with RSS-210 of Industry Canada. Operation is subject to the following conditions:

(1)This device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device

Europe - This digital equipment fulfills the

requirements for radiated emission according to limit B of EN55022/1998, and the requirements for immunity according to EN55024/1998 residential, commercial, and light industry.

Liability

Every care has been taken in the preparation of this manual; Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Trademark Acknowledgments

Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN Manager, Linux, Macintosh, Microsoft, Mozilla, Netscape Navigator, OS/2, UNIX, Windows, WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Axis Communications AB is independent of Sun Microsystems Inc. UPnP™ is a certification mark of the UPnP™ Implementers Corporation.

Support Services

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

•download user documentation and firmware updates

•find answers to resolved problems in the FAQ database. Search by product, category, or phrases

•report problems to Axis support staff by logging in to your private support area

•visit the Axis Support Web at www.axis.com/techsup/

Safety Notice - Battery Replacement

The AXIS 240Q uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC). This battery will, under normal conditions, last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when battery replacement is required. The battery should not be replaced unless required!

If the battery does need replacing, observe the following points:

•Caution! Danger of Explosion if battery is incorrectly replaced

•Replace only with the same or equivalent battery, as recommended by the manufacturer.

•Dispose of used batteries according to the manufacturer's instructions.

AXIS 240Q User’s Manual Revision 1.1, March 2006 Part No: 26538

AXIS 240Q specifications

Axis Communications has long been a leading innovator in the field of network video surveillance, and one of its notable products is the AXIS 240Q. This powerful encoding unit has garnered attention for its versatility and robust feature set, making it an excellent choice for a variety of surveillance applications.

One of the standout features of the AXIS 240Q is its ability to support multiple video formats, making it suitable for both analog and digital cameras. With four channels, this encoding unit allows users to connect and manage up to four cameras simultaneously, significantly enhancing surveillance capabilities in diverse environments. Whether it’s securing a retail space or monitoring a parking lot, the AXIS 240Q ensures seamless integration with existing systems.

The device employs advanced video compression technologies, including Motion JPEG and MPEG-4, enabling efficient use of bandwidth and storage. These compression methods allow for high-quality video streaming while minimizing data usage, which is essential for organizations looking to maintain efficient surveillance operations without overwhelming their network infrastructure.

In terms of security, the AXIS 240Q is equipped with multiple security features to protect video feeds and ensure the integrity of recorded data. It supports secure HTTPS and SSL encryption, safeguarding data as it travels over the network. Additionally, the unit allows for user access control to manage permissions for different operators, further reinforcing the device's security profile.

The AXIS 240Q also comes with an easy-to-use web-based interface, facilitating simple configuration and remote management. This feature is particularly beneficial for organizations that require continuous monitoring and need quick access to settings, regardless of location.

With its compact design and robust build quality, the AXIS 240Q is suitable for a range of indoor and outdoor installations. The unit is also designed with flexibility in mind, allowing for easy integration with various third-party software solutions due to its compliance with industry standards such as ONVIF.

In summary, the AXIS 240Q from Axis Communications showcases a powerful blend of features and technologies tailored for modern surveillance needs. Its multi-channel capability, advanced compression methods, security features, and ease of use make it an essential tool for organizations aiming to enhance their security systems while optimizing operational efficiency. Whether used in small businesses or large enterprises, the AXIS 240Q continues to set the standard for reliability and performance in the surveillance market.

Axis Communications AXIS 240Q user manual About This Document

Models: AXIS 240Q