30 AXIS 240Q - Pan Tilt Zoom
PTZ Controls
If the AXIS 240Q has been appropriately configured, the Live View page will display the
controls available for the installed Pan Tilt Zoom (PTZ) device. The administrator can
enable/disable the controls for specified users.
Video sources
Preset positions
Tilt bar (relative)
The exact controls shown depends on the make and model of PTZ device. There may be
e.g. Focus and Iris bars available as well, but the most common controls are;
• the Pan bar - moves the camera to the right and left
• the Tilt bar - tips the ca mera up and down
• the Zoom bar - zooms the view in and out. Note that this is only available if the
camera is fitted with a zoom lens.
• the Iris bar - adjusts the brightness of the image
Clicking on the bars themselves or on the arrows at the end of the bars will move the
camera to a new position. The type of movement and the location of this new position
depends on the type of PTZ driver.
When controlling the camera using a relative PTZ driver (see the bars in the illustration
above) the new position will be relative to the previous position, e.g. left of, below, above,
etc. Clicking the bar further from the center results in a larger movement.