AXIS P1343 Network Camera

Events

5.Set one of the available pre-programmed time intervals from the Schedule drop-down list.

6.Select Send Notification from the Type drop-down list.

7.Select where to send the notification from the Recipient drop-down list.

To add additional criteria, select the Additional conditions option. Add and select the desired options as described above. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

To copy, modify or remove an action rule, select the action rule in the Action Rule List and click Copy, Modify or Remove.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Recipients

Recipients receive image files and notification messages. A recipient can be an FTP, HTTP or TCP server, a network share or an email address. TCP servers are used for notification messages only.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

Schedules

An action can be set up to occur on a schedule. Included in the list are predefined schedules for after and during office hours, weekdays or weekends.

To create a new schedule:

1.Go to Events > Schedules and click Add.

2.Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.

3.Click OK.

To use the schedule in an Action Rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.

Recurrences

An action can be set up to recur a specific number of times in a period, for example every 2 minutes or every hour.

To set up a recurrence:

1.Go to Events > Recurrences and click Add.

2.Enter a descriptive name and recurrence pattern.

34

Page 34
Image 34
Axis Communications AXIS P1343 user manual Recipients, Schedules, Recurrences