AXIS M3114-R Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

Applications — use installed applications to trigger the rule, see Applications, on page 27.

Detectors

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 24.

-Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 24.

Hardware

-Network — trigger the rule if network connection is lost or restored.

Input Signal

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 8 . This can for example be used to validate actions during product installation and configuration.

PTZ

Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

System

-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 30. This can for example be used to upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 30.

Available actions include:

PTZ Control

-Preset Position — go to a preset position.

-Guard Tour — start a guard tour, see Guard Tour, on page 22.

Record Video — record video to a selected storage.

Send Images — send images to a recipient.

Send Notifications — send a notification message to a recipient.

28

Page 28
Image 28
Axis Communications M3114-R user manual Events