AXIS P1346–E Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 45.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 45.

Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 51) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

44

Page 44
Image 44
Axis Communications P1346-E Network, Basic TCP/IP Settings, IPv4 Address Configuration, IPv6 Address Configuration, ARP/Ping

P1346-E specifications

Axis Communications P1346-E is a high-performance network camera designed for outdoor surveillance applications. This device combines advanced technology with ease of use, ensuring reliable security monitoring in various environments. The P1346-E is part of Axis’s extensive line of IP cameras, recognized for their quality and innovation in the field of network video surveillance.

One of the standout features of the P1346-E is its 1/2.8 inch progressive scan CMOS sensor, which enables high-definition video capture at resolutions up to 1080p (1920x1080 pixels). This resolution not only provides exceptional image clarity but also allows for detailed identification of subjects, making it an optimal choice for critical surveillance areas.

The P1346-E incorporates Axis's Lightfinder technology, which enhances the camera's performance in low-light conditions. This innovative feature delivers color images in dim environments, enabling comprehensive monitoring even during nighttime or in poorly lit areas. Additionally, it supports Wide Dynamic Range (WDR) technology, which captures details in both bright and dark areas of the scene. This is particularly beneficial in challenging lighting situations, such as entrances with powerful glare or areas transitioning between light and shadow.

Another notable aspect of the P1346-E is its weather-resistant design, rated IP66, meaning it can withstand harsh weather conditions, including rain, snow, and dust. This ruggedness makes it suitable for outdoor deployment in a variety of climates. The camera is also equipped with an integrated heater, ensuring functionality in extreme cold temperatures.

In terms of connectivity, the P1346-E supports Power over Ethernet (PoE), simplifying installations by allowing power and data transmission through a single cable. This feature enhances flexibility in camera placement and reduces installation costs. Moreover, the camera supports dual stream capabilities, allowing different video compression formats for various applications, such as H.264 and Motion JPEG.

The P1346-E is also equipped with intelligent analytics capabilities, such as motion detection and audio detection, which can trigger alerts or notifications. This adds an additional layer of security, enabling proactive monitoring of monitored areas.

In summary, the Axis Communications P1346-E is a sophisticated outdoor surveillance solution combining high-definition video quality, advanced imaging technologies, rugged design, and flexible deployment options. With its array of features, it provides reliable security solutions for various applications, from urban surveillance to critical infrastructure monitoring.