Axis Communications P1354, P1353 manual Function Pin Specifications

AXIS P1353/P1354 Installation Guide Page 11

Function	Pin	Notes	Specifications
GND	1	Ground
3.3 V DC	2	Can be used to power auxiliary equipment.	Max load = 50 mA
Power		Note: This pin can only be used as power out.
Digital	3	Connect to GND to activate, or leave floating	Min. input = -40 V DC
Input		(unconnected) to deactivate.	Max. input= +40 V DC
Digital	4	Uses an open-drain NFET transistor with the source	Max. load =100 mA
Output		connected to GND. If used with an external relay, a	Max. voltage = + 40 V DC	ENGLISH
		diode must be connected in parallel with the load,
		for protection against voltage transients.

The following connection diagram gives an example of how to connect an auxiliary device to the network camera.

	1
3.3 V max 50 mA	2
	3
	4