![](/images/new-backgrounds/1316421/31642119x1.webp)
Page 10 | AXIS |
AXIS IP Utility - single camera/ small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. You can also manually set a static IP address through this application. AXIS IP Utility is available on the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the network camera on the same network segment (physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1.Check that the network camera is connected to the network and that power has been applied.
2.Start AXIS IP Utility.
3.When AXIS P3346/AXIS
4.See page 12 for instructions on how to set the password.
Set the IP address manually (optional)
1.Acquire an unused IP address on the same network segment your computer is connected to.
2.Select the network camera in the list.
3.Click the button Assign new IP address to selected device - and enter the serial number and IP address for the network camera. The serial number is located on the product label.
4.Click the Assign button and follow
5.Click the Home Page button to access the camera’s web pages.
6.See page 12 for instructions on how to set the password.