Page 18 | AXIS |
Set the IP address with ARP/Ping
1.Acquire a free static IP address on the same network segment your computer is connected to.
2.Locate the serial number (S/N) on the camera’s label.
3.Open a command prompt on your computer and enter the following commands:
Windows syntax |
| Windows | example |
|
| ||
arp | arp | ||
ping | <IP Address> | ping | 408 |
UNIX/Linux/Mac | syntax | UNIX/Linux/Mac example | |
|
| ||
arp | arp | ||
ping | ping | 408 192.168.0.125 | |
4.Check that the network cable is connected to the network camera and then start/restart the network camera, by disconnecting and reconnecting power. If PoE is used, start/restart the network camera by disconnecting and then reconnecting the network cable.
5.Close the command prompt when you see ‘Reply from 192.168.0.125:...’ or similar.
6.In your browser, type in http://<IP address> in the Location/Address field and press Enter on your keyboard.
Notes:
•To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.
•To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.
Unit connectors
Network connector -
Audio in - 3.5mm input for a mono microphone, or a
Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active speaker with a
SDHC memory card slot - The high capacity SD memory card can be used for local recording with removable storage.
