Issues |
| Solutions and Explanations |
|
There is picture/Video. |
| • Check cable connections (remove and reconnect all cables connected to the TV and external | |
|
| devices). | |
|
| • Set your external devices’ (Cable/Set top Box, DVD, | |
|
| connections to the TV input. For example, if an external device’s output is HDMI, it should be connect | |
|
| to an HDMI input on the TV. | |
|
| • Make sure your connected devices are powered on. | |
|
| • Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote. | |
|
|
|
|
RF(Cable/Antenna) Connection |
|
| |
|
|
|
|
The TV is not receiving all channels. |
| • Make sure the Antenna cable is connected securely. | |
|
| • Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - | |
|
| Setup - Plug & Play (Initial setup) and wait for all avaiable channels to be stored. | |
|
| • Verify the Antenna is positioned correctly. | |
|
|
|
|
The picture is distorted: macroblock error |
| • Compression of video contents may cause picture distortion, especially with fast moving pictures | |
small block, dots, pixelization |
| such as sports and action movies. | |
|
| • A low signal can cause picture distortion. This is not a TV issue. | |
|
|
|
|
PC Connection |
|
| |
|
|
| |
A “Not Supported Mode” message |
| • Set your PC’s output resolution and frequency so they matche the resolutions supported by the TV. | |
appears. |
|
|
|
|
|
|
|
“PC” is always shown on the source list, |
| • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. | |
even if a PC is not connected. |
|
|
|
|
|
|
|
The video is OK but there is no audio. |
| • If you are using a HDMI connection, check the audio output setting on your PC. | |
|
|
|
|
Network Connection (Depending on Models) |
|
| |
|
|
|
|
Wireless network connection failed. |
| • Samsung Wireless USB dongle is required to use a wireless network. | |
|
| • Make sure the Network Connection is set to Wireless. | |
|
| • Make sure the TV is connected to a wireless IP sharer (router). | |
|
|
|
|
Others |
|
| |
|
|
|
|
The picture won’t display in full screen. |
| • HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3) | |
|
| contents. | |
|
| • Black bars on the top and bottom will appear during movies that have aspect ratios different from | |
|
| your TV. | |
|
| • Adjust the picture size options on your external device or TV to full screen. | |
|
|
|
|
The remote control does not work. |
| • Replace the remote control batteries with the poles | |
|
| • Clean the sensor’s transmission window on the remote. | |
|
| • Try pointing the remote directly at the TV from 5~6 feet away. | |
|
|
|
|
The cable/set top box remote control |
| • Set the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for | |
doesn’t turn the TV on or off, or adjust the |
| the SAMSUNG TV code. | |
volume. |
|
|
|
|
|
|
|
A “Not Supported Mode” message |
| • Check the supported resolution of the TV, and adjust the external device’s output resolution | |
appears. |
| accordingly. Refer to the resolution settings on page 24 of this manual. | |
|
|
|
|
There is a plastic smell from the TV. |
| • This smell is normal and will dissipate over time. | |
|
|
|
|
The TV Signal Information is unavailable |
| • This function is only available with digital channels from an Antenna / RF/Coax connection. | |
in the Self Diagnostic Test menu. |
|
|
|
|
|
|
|
The TV is tilted to the side. |
| • Remove the base stand from the TV and reassemble it. | |
|
|
|
|
There are difficulties assembling the stand |
| • Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, use a | |
base. |
| magnetized screw driver. | |
|
|
|
|
The channel menu is grayed out. |
| • The Channel menu is only available when the TV source is selected. | |
(unavailable) |
|
|
|
|
|
|
|
Your settings are lost after 30 minutes or |
| • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change | |
every time the TV is turned off. |
| the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. | |
|
| Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial | |
|
| setup) → ENTERE. |
|
You have intermittent loss of audio or |
| • Check the cable connections and reconnect them. | |
video. |
| • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are | |
|
| flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 | |
|
| degree connectors. | |
|
|
|
|
|
| English 45 | |
