Ad-hoc: You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.

How to connect to new Ad-hoc1.Choose Select a network.

2.While in the device list, press the Blue button on the remote or select Ad-hoc.

✎The message The existing network system✎

may have limited functionality. Do you want to change the network connection? is displayed.

3.Input the generated Network Name (SSID) and Security Key into the device you want to connect.

How to connect an existing Ad-hoc device1.Choose Select a network. Then, the device list will be displayed.2.Select the device you want in the Device list.3.If security key was applied, input the security key again.✎If network doesn’t operate normally, check✎

the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.

Wireless Network Setup (Auto / Manual)

If you connect the AP which supports DHCP, you can set Internet Protocol Setup to Auto.

If The AP supports a static IP address, you must set Internet Protocol Setup to Manual.

1.Set Network Type to Wireless.

2.Select Network Setup.

xx Selects an AP(Access Point) and ad hoc network.

xx Set Internet Protocol Setup and DNS Server to Auto or Manual. If you set to Manual, you can set up IP Address, Subnet Mask, Gateway and DNS Server manually by pressing number buttons on the remote control.

3.Select Network Test to check the network connectivity.

Network Test

Test or confirm the network connection status after setting up the network.✎✎When unable to connect to a wired network

xx If your internet service provider has already registered the MAC address of the PC you're using to connect to the internet and authenticates the address each time you connect to the internet, your TV may not connect to the internet because the MAC address differs from that of the PC. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet.

xx If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet sharer (router).

xx The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics.

✎✎When unable to connect to an AP (Access Point)

xx Your TV may fail to locate an AP (Access Point) that is configured as a private SSID type. In this case, please change the AP settings and try again. If your internet service provider has already registered the MAC address of the PC you're using to connect to the internet and authenticates the address each time you connect to the internet, your TV may not connect to the internet because the MAC address differs from that of the PC. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics.

Features Advanced 04

English 25