Axis Communications P3384-V user manual Video and Audio, Video Stream, Image, 264

AXIS P3384–V Fixed Dome Network Camera

Video and Audio

Video and Audio

The video and audio settings can be used to optimize video and audio quality. You can configure the following:

•Video stream settings. See page 17.

•Stream profiles. See page 18.

•Camera settings. See page 19.

•View areas. See page 21.

•Overlay image. See page 21.

•Privacy mask. See page 22.

•Focus and zoom. See page 23.

•Audio settings. See page 23.

•Audio clips. See page 25.

Video Stream

You can define the following video stream settings from Video & Audio > Video Stream:

•Image. See page 17.

•Audio. See page 23.

•H.264. See page 17.

•MJPEG. See page 18.

Image

The default image settings can be configured under Video & Audio > Video Stream. Select the Image tab.

The following settings are available:

•Resolution. Select the default resolution.

•Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower the compression, the higher the image quality with higher bandwidth requirements and larger file sizes.

•Mirror image. If required, the image can be mirrored.

•Rotate image. If required, the image can be rotated.

•Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited, which means the Axis product always delivers the highest frame rate possible under the current conditions.

•Overlay settings. See Overlay on page 21.

Click Save to apply the new settings.

H.264

H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-frames only contain the differences from previous frames.

17