AXIS Q1615-E Network Camera
Hardware Overview
LED | Color | Indication |
| |
|
|
| ||
Housing | Green | Normal operation. | ||
(fan and heater) |
|
|
| |
Flashing | Single flash: | Heater error | ||
| ||||
| green | Double flash: | Fan error | |
|
| Triple flash: | General error | |
|
| Alarm events will be triggered through the camera’s input port. | ||
|
| Contact your Axis reseller for information about spare parts and troubleshooting. | ||
|
|
|
| |
Note
This status LED referred to in the table above is located in the housing.
Status LED Behavior for Focus Assistant
Color
Green
Amber
Red
Indication
Focus Assistant is enabled
The lens is optimally adjusted
The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.
The lens is less optimally adjusted.
The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.
The lens is poorly adjusted.
Buzzer Signal for Focus Assistant
Buzzer
Fast interval
Medium interval
Slow interval
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
Status LED Behavior and Buzzer Signal for Levelling Assistant
For information on the Function button used for levelling the camera, see Connectors and Buttons.
Color | Buzzer | Camera position |
|
|
|
Fixed green | Continuous beep | Level |
|
|
|
Flashing green | Fast interval | Almost level |
|
|
|
Flashing orange | Medium interval | Not level |
|
|
|
Flashing red | Slow interval | Far from level |
|
|
|
Replace the Lens
It is possible to use optional lenses for the Axis product.
To replace the lens:
1. Disconnect the iris cable.
10
