Axis Communications Q3505-V No audio, Settings, Poor audio quality, Options Date & Time

AXIS Q3505–V Fixed Dome Network Camera

Troubleshooting

No audio

Incorrect setup	Check the sound card in the computer. Ensure that mute is not selected and that the volume
	settings are correct.
	Check that Enable audio support is selected under Setup > System Options > Security > Audio
	Support.
	Check that the correct Audio Input source is selected under Setup > Video & Audio > Audio
	Settings.
Poor audio quality
Stuttering	Reduce the number of listeners and viewers. Decrease image resolution and compression.
Unsynchronized audio and	Synchronize the product’s date and time settings with an NTP server. Go to Setup > System
video using H.264	Options > Date & Time.
Distorted audio	Check that the correct Audio Input source is selected under Setup > Video & Audio > Audio
	Settings.
Feedback loops	Feedback loops might appear in full-duplex mode. Try moving the microphone or the speaker, or
	use half-duplex mode instead.
Storage and disk management problems
Storage disruption	A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other
	read or write problems occur. To identify the source of the problem, check the System Log under
	System Options > Support > Logs & Reports. Depending on the problem, it might be necessary to
	re-mount the storage device.
	For information on how to set up a storage disruption alarm, see Events on page 38.
Video cannot be recorded	Check that the SD card is not write protected (that is, read only).
SD card cannot be mounted	Reformat the SD card and then click Mount.

NOTICE

Formatting the card will remove all content, including all recordings, from the SD card.

61