Axis Communications Q6044 PTZ Controls, Speaker button Click to turn the speakers on or off

Models: Q6044

1 68
Download 68 pages 7.72 Kb
Page 12
Image 12

AXIS Q6044 PTZ Dome Network Camera

Access the Product

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode, the Microphone and Talk buttons must both be active to send audio to the Axis product. Click either button to stop audio transmission.

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel:

Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

Toggle mode: Click once to switch between talking and listening.

Simplex – speaker only mode

To send audio, the Talk and Microphone buttons must both be active. Click either button to stop audio transmission.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under System Options > Security > Users.

With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.

Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding the area to be magnified. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.

User-defined buttons can also appear in the Control panel. See Controls on page 31.

Select a recorded tour and click to play a previously recorded tour and click to stop. See

Tour Recording on page 30.

Select a PTZ preset position to steer the camera view to the saved position. See Preset Positions on page 28.

Click the Start Auto Track button to start autotracking directly from the Live View page. See

Autotracking on page 29.

12

Page 12
Image 12
Axis Communications Q6044 user manual PTZ Controls, Speaker button Click to turn the speakers on or off