AXIS Q6045–S PTZ Dome Network Camera
Live View Config
Note
To enable this setting at least one I/O port must be configured as an output port. See I/O Ports, on page 55.
To display output buttons in the Live View page:
1.Go to Setup > Live View Config.
2.Under Output Buttons, select the type of control to use:
-Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60 seconds.
-Active/Inactive displays two buttons, one or each action.
To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port’s Normal state. For more information about I/O ports, see I/O Ports, on page 55.
28
