AXIS Q7424-R Installation Guide

Page 13

Other methods of setting the IP address

The table below shows other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled.

 

Use in operating

Notes

 

 

 

system

 

 

 

 

 

 

 

 

UPnP™

Windows

When enabled on your computer, the video encoder is

 

 

 

 

automatically detected and added to “My Network Places.”

 

 

 

 

 

 

 

Bonjour

MAC OSX

Applicable to browsers with support for Bonjour. Navigate to the

 

 

ENGLISH

AXIS Dynamic DNS

(10.4 or later)

Bonjour bookmark in your browser (e.g. Safari) and click on the

 

All

A free service from Axis that allows you to quickly and simply

 

 

 

link to access the video encoder’s web pages.

 

 

Service

 

install your video encoder. Requires an Internet connection with

 

 

 

 

 

 

no HTTP proxy. See www.axiscam.net for more information.

 

 

 

 

 

 

 

ARP/Ping

All

See below. The command must be issued within 2 minutes of

 

 

 

 

connecting power to the video encoder.

 

 

View DHCP server

All

To view the admin pages for the network DHCP server, see the

 

 

admin pages

 

server’s own documentation.

 

 

 

 

 

 

 

Set the IP address with ARP/Ping

1.Acquire a free static IP address on the same network segment your computer is connected to.

2.Locate the serial number (S/N) or numbers on the AXIS Q7424-R label.

3.Open a command prompt on your computer and enter the following commands:

Windows syntax

Windows

example

 

 

arp -s <IP Address> <Serial Number>

arp -s 192.168.0.125 00-40-8c-18-10-00

ping -l 408 -t <IP Address>

ping -l

408 -t 192.168.0.125

UNIX/Linux/Mac syntax

UNIX/Linux/Mac example

 

 

arp -s <IP Address> <Serial Number> temp

arp -s 192.168.0.125 00:40:8c:18:10:00

ping -s 408 <IP Address>

temp

408 192.168.0.125

 

ping -s

4.Check that the network cable is connected to the AXIS Q7424-R and then start/restart the AXIS Q7424-R, by disconnecting and reconnecting power. If PoE is used, start/restart the AXIS Q7424-R by disconnecting and then reconnecting the network cable.

5.Close the command prompt when you see ‘Reply from 192.168.0.125:...’ or similar.

6.In your browser, type in http://<IP address> in the Location/Address field and press Enter.

Notes:

To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.

To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.

Page 13
Image 13
Axis Communications Q7424-R manual Other methods of setting the IP address, Set the IP address with ARP/Ping