Axis Communications manual Axis Q7424-R Video Encoder Installation Guide, Package contents

AXIS Q7424-R Installation Guide Page 5

AXIS Q7424-R Video Encoder

Installation Guide

This installation guide provides instructions for installing the AXIS Q7424-R video encoder on your network. For all other aspects of using the product, please see the product’s User Manual on www.axis.com

Installation steps

Follow these steps to install AXIS Q7424-R on your local network (LAN):

ENGLISH

1.Check the package contents against the list below.

2.Hardware overview. See page 6.

3.Install the hardware. See page 7.

4.Assign an IP address. See page 8.

5.Set the password. See page 11.

Important!

This product must be used in compliance with local laws and regulations.

Package contents

Item	Models/variants/notes
Axis video encoder model	AXIS Q7424-R
Mounting kit	• 4 Surface protection pads
	• Terminal block connectors (I/O: 6-pin connector, RS-485/RS-
	422: 2 x 2-pin connector, Power: 3-pin connector, Audio: 4-pin
	connector)
	• Allen key (hex key) for tamper-proof SD-lid screw
CD	AXIS Network Video Product CD, including installation tools and other
	software
Printed materials	AXIS Q7424-R Installation Guide (this document)
	Axis Warranty Document
Optional accessories	DIN Rail Clip