Axis Communications AXIS T90C10/T90C20 Installation Guide, Back view, English, Front view

AXIS T90C10/T90C20 Installation Guide Page 9

5.Plug the gaskets into the side and back holes. The gaskets should fit snugly in the holes with no folds or bends.

6.Place the IR-LED beneath the unit casing aligning the screw hole on the back of the IR-LED with the screw hole in the unit casing; screw the IR-LED on to the unit casing with the single screw.

7.Attach the unit casing to the mounting bracket.

Back view

Screw IR-LED

ENGLISH

8.For vandal-resistant installation do the following:

a.Detach the cover on the IR-LED.

b.Screw the IR-LED to the wall with 2 screws.

c.Replace the cover after ensuring the gasket is in place.

Front view

Screw here

Screw here

9.Connect the network cable from the IR-LED to the PoE switch or midspan (AXIS T90C20); or connect the DC cable to the PSU (AXIS T90C10).

10.To complete the camera installation please refer to the installation guide provided with the network camera.