Axor 10140XX1, 10106XX1, 10175001 Installation, Position the faucet on the sink or countertop

Models: 10145XX1 10170001 10140XX1 10185001 10101XX1 10180001 10175001 10106XX1

1 16

Page 5

Install and tighten the mounting nut (2). Tighten the tensioning screws (3).

Tighten the hoses with two wrenches, as shown, to prevent the hoses from twisting.

Image 5

Contents

10101XX1 Starck10106XX1 10140XX1Starck Starck10101XX1/10106XX1 10140XX1/10145XX1Technical Information Do not bend or twist the supply hose Installation notesPosition the faucet on the sink or countertop InstallationConnect the 3/8” adapters to the stops Connect the hoses to the adaptersTurn the hot and cold supplies on Reconnect the power cable Wait 30 secondsRemove the faucet body Replace the faucet body Replace the screwWait 30 seconds Remove the four screws and the battery pack coverClean the aerator and filters --all models Wait 30 seconds Turn the water on Reconnect the power cableCleaning 10180 / 10185 only Change the Spray Former --StarckInstall the new spray former. Tighten the screws Remove the old spray formerReduce the Sensor Range Replacement Parts Limited Lifetime Consumer Warranty Cleaning Recommendation for Hansgrohe ProductsCleaning Materials for Faucets and Showers Cleaning Instructions for Faucets and ShowersTel. 770 360-9880 Fax