Axor 10101XX1, 10106XX1, 10175001, 10180001, 10185001, 10140XX1, 10170001, 10145XX1 Cleaning

Models: 10145XX1 10170001 10140XX1 10185001 10101XX1 10180001 10175001 10106XX1

1 16

Page 11

The faucet may be turned off temporarily so that the sink may be cleaned.

Cover the sensor window with a hand for approximately 10 seconds.

The faucet will turn off for approximately 60 seconds, so that the sink may be cleaned.

The LED in the sensor window will flash.

When the LED no longer flashes, the faucet may be used normally.

Image 11

Contents

10140XX1 Starck10101XX1 10106XX110140XX1/10145XX1 StarckStarck 10101XX1/10106XX1Technical Information Do not bend or twist the supply hose Installation notesConnect the hoses to the adapters InstallationPosition the faucet on the sink or countertop Connect the 3/8” adapters to the stopsTurn the hot and cold supplies on Replace the faucet body Replace the screw Wait 30 secondsReconnect the power cable Remove the faucet bodyWait 30 seconds Remove the four screws and the battery pack coverClean the aerator and filters --all models Wait 30 seconds Turn the water on Reconnect the power cableCleaning Remove the old spray former Change the Spray Former --Starck10180 / 10185 only Install the new spray former. Tighten the screwsReduce the Sensor Range Replacement Parts Cleaning Instructions for Faucets and Showers Cleaning Recommendation for Hansgrohe ProductsLimited Lifetime Consumer Warranty Cleaning Materials for Faucets and ShowersTel. 770 360-9880 Fax