Connect the faucet power cable to the battery pack or AC power pack (1). Plug the AC power pack in.
Turn the hot and cold supplies on (2).
Remove the protective film from the sensor window (3).
Wait 30 seconds before attempting to use the faucet (4).
Position your hand in front of the sensor to turn the water on.
Due to air in the faucet, the spray pattern may be unattractive for the first 10 - 15 uses after installation or service.
Models with manual temperature adjustment only: pull the temperature lever forward to make the water cooler, backward to make it warmer.
Temperature adjustment - 10106XX1/10145XX1/10175001/10185001 only
Turn the water supplies off (1).
Disconnect the faucet power cable from the battery pack or AC power pack (2).
Remove the screw from the rear of the faucet (3).
