English
1 |
2. |
4 mm |
1. |
2 |
3 |
4 |
2. |
4 mm
Installation
Remove the dust cover (1).
Close the stops using a 4 mm Allen wrench (2).
closed
open
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛" outside the surface of the finished wall.
Seal the wall around the plaster shield using waterproof sealant.
Failure to seal the wall may result in water damage.
Remove the flush insert and seals.
Flush the supplies:
Use extreme caution when carrying out this step.
1. (1) Carefully open both stops.
(2)Allow the hot and cold supplies to flush.
(3)Close both stops.
3.
