English
3 |
1 |
2 |
3 |
6 mm |
4 |
2 |
1 |
3 |
17 mm
Drill the screw holes with a 6 mm drill bit suit- able for the wall surface (1,2).
Do not drill into water line!
Install the anchors (3).
Seal the wall around the an- chors with waterproof sealant.
Failure to seal the wall can lead to possible water damage.
Wrap the threads on the nipple with Teflon thread tape (1).
Seal the wall around the nipple with waterproof sealant (2).
Failure to seal the wall can lead to possible water damage.
Install the mounting piece using a 17 mm wrench (3).
5 | 1 |
| |
| 2 |
3 |
|
2.5 mm | 4 |
12 |
|
Secure the mounting piece to the wall with the four screws (1).
Position the shower arm over the mounting piece (2).
Tighten the set screw using a 2.5 mm allen wrench (3).
Thread the escutcheon over the mounting piece by turning it clockwise (4).
