43
MOVING ON
Axxess® Model 8600 Phone User Guide – Axxess IP Mode
To set up remote messaging:
1. Access your mailbox as described on page 27.
2. Press to select the Personal Options Menu.
3. Press .
NOTE: This option is not available if you do not have Remote Messaging enabled.
4. Press to set up a primary cascade or press to set up an alternate cascade.
5. Do one of the following.
• To program a cascade level: Press and enter the number of the level you
wish to program (1-9). You then have the following options:
—To set up or change an extension or telephone number: Press . Then
press for an extension number or press for an outside number.
Then enter the number.
—To set up or change a pager number: Press . Then enter the number.
—To enable or disable the cascade level: Press . (You cannot enable the
level until a notification number is programmed.)
• To set up the time of day for notification: Press . Then enter the time
you want the message notification to start and stop. Enter the times with two
digits for the hour and two digits for the minutes (e.g., 0900 = 9:00). If enter-
ing the time in 12-hour format, you are prompted to press for AM or
for PM.
NOTE: For 24-hour notification, program the starting and ending times to be
the same.
• To set up the days of the week for notification: Press . Then select one
of the following:
— Press for Monday-Friday.
— Press for all days.
— Press to select individual days. You are prompted to press digits 1-7
which correspond to the days Sunday through Saturday.
• To select all or priority-only message notification: Press . Then press
for all messages or for priority messages only.
6. Either select another option, as described above, or press to save the settings
and exit.
4
5
1 2
1
2
1 2
3
1
2
1 2
3
1
2
3
4
1 2
#
Hawk.book Page 43 Wednesday, November 5, 2003 1:05 PM