Standby
A short press on the standby button of the Ayre
3-Phase Power Supply will turn that individual
component off. A longer press (more than two
seconds) will turn off all linked components.
A long button press provides a simple way to turn
the entire system off from any linked component.
Display Brightness
Changing the brightness level on the display of any
linked component will cause a matching change in
all linked components, including the status LED of
the 3-Phase Power Supply.
There is no directly accessible brightness control
for the status LED on the 3-Phase Power Supply.
However if there are no other linked components
available to adjust the brightness, a special
configuration mode allows the desired brightness
level to be selected. Please refer to the chapter
“Optimization and Customization”.
Break-InPlaying the unit for 100 to
500 hours will ensure full
break-in.
Due to the manufacturing processes used for the
printed circuit boards, wires, and capacitors, a
break-in period is necessary for the Ayre 3-Phase
Power Supply to reach its full performance
potential.
9