Connections and
Installation
The Ayre 3-Phase Power Supply is easy to connect and use. The following guidelines will ensure that the installation goes smoothly.
Location
A good location for your power supply is at an easily accessible height in an open-backed cabinet or on a shelf. The internal power transformer creates a low-level stray magnetic field that may induce hum if placed too close to some phono cartridges.
Motor Drive Output
The Ayre 3-Phase Power Supply is designed to only power the dps turntable. Simply connect the DIN connector from the motor cable to the rear of the power supply and tighten the locking ring.
Do not connect the 3-Phase Power Supply to any other brand of turntable. Doing so may damage the power supply and/or the motor.
