AyreLink connections are made with commonly
available two-line telephone line cords using
modular (RJ-11) connectors. (These are the cords
that connect the telephone set to the wall in many
countries.) They are readily available in different
lengths and various colors at most electronics stores.
Be sure to use two-line telephone cords
to make AyreLink connections. These
can be identified by the four gold
contacts on each connector. Single-line
cords with only two gold contacts will
not function in this application.
The linked components may be
joined in any convenient order.
The linked components should be connected in
daisy-chain fashion, connecting each component to
another until all of the linked components have been
connected.
When connecting the linked
components to form a chain, be careful
not to connect the two ends of the
chain. Closing the chain to form a loop
will cause the AyreLink system not to
function.
6