Input Source Selection
The input selector buttons are located at the right side of the unit. Icons that match the connector labels on the rear panel (Star, Planet, Comet, Moon) are used to denote the inputs.
When the unit is first connected to an AC power source, the “Star” input is selected by default. After that, the current input selection is retained in memory, even when the unit is placed in “Standby”.
The input selector utilizes sophisticated FET switches. Both the signal and ground connections to each source component are switched, so that any
Tape Output
The “Tape Output” function | When the “Tape Output” button is pressed, the |
does not operate on the “Moon” | indicator will light up and the signal from the |
input. This avoids the | currently selected source component will be routed |
undesired possibility of | to the “Tape Out” connectors. This allows a |
creating a feedback loop. | recording to be made. |
| Turn the “Tape Output” off unless a recording is |
| being made. This will completely disconnect the |
| recorder from the |
| connection), avoiding the possibility of undesired |
| ground loops. |
8