display is off. When commands are received, either from the front-panel buttons or the remote control, the display will be activated for a few seconds to confirm the command, and then turn off automatically. Pressing the “Display” button on the remote control again will turn the display on.
Processor Pass-Through
When using the Ayre K-5xeMPin a surround-sound system for home theater, it is desirable to use the “Processor Pass-Through” mode. This mode allows your two-channel music sources to be routed directly through the K-5xeMP, avoiding the sonic degradation of most processors, and at the same time allows the front two channels of the theater system
to integrate with the K-5xeMPwith the touch of a single button.
If you are using a surround-sound processor, connect the front left and right outputs of the processor to one of the inputs on the K-5xeMP. Please note that
