playback levels. The amplifier will automatically revert to “Standby” (green) when it has cooled. Be sure to correct the problem before continuing to use the amplifier.
Red DC Offset – Excessive DC offset is present at the amplifier output. If there are any unusual noises coming from the loudspeaker, immediately disconnect the amplifier from the AC power. Please refer to the above section “DC Offset” for additional troubleshooting details.
Flashing Red Blown Fuse – The amplifier has blown an internal fuse due to excessive loading or a
Violet Low AC Line Voltage – The AC line voltage has dropped below 75% of normal, or has lost AC power altogether. The amplifier will automatically revert to “Standby” (green) when the AC power is restored to normal.
Flashing Violet Configuration Mode – The unit has been placed into the “Configuration Mode”. Please refer to the chapter “Customization and Configuration for additional details. It will automatically revert to “Standby” (green) after ten seconds.
20
