Ayre Acoustics MX-R manual Rail Fuses

the amplifier has cooled will be displayed on the front panel of the preamplifier.

To restore the unit to the blue “Operate” mode, simply press the front-panel button.

If the amplifier is linked to an AyreLink-equipped preamplifier with an alpha-numeric display, restoring operation of the amplifier will clear any messages displayed on the front panel of the preamplifier. (Messages may also be cleared by placing the preamplifier in “Standby”.)

Rail Fuses

Internal power supply fuses protect both the loudspeakers from excessive current and the amplifier from short-circuits. If one of these fuses blows, the amplifier will not operate and the status LED will flash red.

If the amplifier is linked to an AyreLink-equipped preamplifier with an alpha-numeric display, a message indicating that the amplifier has a blown fuse will be displayed on the front panel of the preamplifier.

The amplifier must be disconnected from the system (including AC power) to replace the fuse.

Do not remove the amplifier cover. Hazardous voltages may exist inside the unit. Please refer fuse replacement to a qualified service technician.

16