SPECIFICATIONS

WR-Pro Receiver :

Receiver type: Double superheterodyne

Sensitivity: 2mV at S/N of 40dB

Battery: 1-9V Alkaline

Power consumption: 25mA

Monitor output: 1V at 30W, Modulation frequency: 1kHz, Deviation: +/-7kHz

Mic output: 8mV w/10KW load, Modulation frequency: 1kHz, Deviation: +/-7kHz

Mic output impedance: 300W

Dimensions: 86(h) x 60(w) x 21.5(d) mm (3.3"x 2.4" x 0.85")

Weight w/battery: 128g (4.5oz)

WM-Pro Transmitter : Modulation system: FM

Sensitivity: 94dB SPL at +/- 2.5KHz deviation

Battery: 1-9V

Power consumption: 30mA

Dimensions: 86(h) x 60(w) x 21.5(d) mm (3.3" x 2.4" x 0.85")

Weight: 98g (3.4oz)

SMX-10:

Type: Stereo Electret Condenser

Frequency Response: 100-18,000Hz

Sensitivity: -40dB at1kHz (1V/Pa)

Output Impedance: 1.5 k ohm at 1kHz

Signal-to-Noise Ratio: 60dB (1kHz at 1Pa)

Dynamic Range: 66dB

Power Supply: 1.5VDC ("AAA" size battery) - not included

Max. SPL: 100dB

Battery Current Drain: 0.5mA

Battery Life: 400 hours with Alkaline battery

Weight w/o battery: 52g

Dimensions: 177mm long - 18.2mm diameter

Output cable: attached with 3.5mm plug

Supplied Accessories: Camera hot-shoe mic holder, windscreen

* Due to constant improvements, specifications are subject to change without notice.

200 Valley Road, Suite 101, Mt. Arlington, NJ 07856, (973)810-3070, FAX (973)810-3076 e-mail: sales@azdencorp.com, web site: www.azdencorp.com

Page 2
Image 2
Azden WHDPRO manual Specifications, WR-Pro Receiver, WM-Pro Transmitter Modulation system FM, SMX-10