Aztech Systems WL635USB

5.1 Main Tab

Open up the Configuration Utility and the below screen will display the current status of the

WL635USB Wireless B/G USB 2.0 Adaptor.

Item Description

Configure

using Windows

Zero Config.

External Configuration Checkbox (Windows XP only): A checkbox that

enables you to disable the WLAN Station Configuration Utility and

indicates that the station driver is to be configured with Windows XP’s

built-in Windows Zero Configuration Utility (WZC).

On Windows XP systems, the WZC service is automatically stopped when

the WLAN Configuration Utility is installed. The WZC is started when

you check the Configure using Windows Zero Configuration

checkbox.

The checkbox is only displayed on Windows XP systems.

To disable the WZC and access using the Configuration Utility, right-

click on the WLAN Utility and then uncheck the Configure using WZC.

Profile name The profile name that is currently connected.

SSID The SSID is the unique name shared among all points in your wireless

network.

The name must be identical for all devices and points attempting to

connect to the same network.

Indicates that the network does not require special security settings

and access rights in order to connect to it (that is, you can connect to the

network by setting the station’s privacy mode to None and authentication

mode to None).

Indicates that the network requires special security settings and access

rights in order to connect to it.

Indicates a hidden network that is not broadcasting its SSID. The SSID

for such networks are listed as <Hidden Network>. In order to connect to

such a network, you must know the network’s SSID.

BBS ID The MAC address for the Access Point or station.

Current Tx

Rate

It displays the currently connected rate.

Channel The channel that is currently connected.

BSS type The type of connection, either Access Point or Peer-to-Peer.