Method Two
•Place the “Windows” disk #1 in drive A. (The instruction use drive A as default for the floppy drive. Replace A with your drive letter if necessary)
•Select Programs from the Start Button and click on Windows Explorer. Click on the drive containing the SS Setup Disk.
•Double click on the file “Setup.exe”.
•Follow the instructions of the setup program.
Smart Switch Setup
To open the program select the Start button then Programs. Under B&B Electronics select the 232XSS and 232XS5 program. The Smart Switch program will prompt the user to select the Module that is in use the first time that the software is run. After the proper Module (232XSS or 232XS5) (232D4SS8 models use 232XSS) is selected then a window specific to that Module will appear and the user may personalize communication parameters as per their specific needs. Com port, Baud Rate, and Data Bits (Character Mode, and User Defined Character may also be set for 232XSS and 232XS5 Modules. The Switch address is 0 for the main device.
Should the user desire to change the Module choice to another, select model in the Settings menu. Then select one of the two support Module types (232XSS or 232XS5). After changing the module number the user will see the window for the selected Smart Switch.
Default Values
When you start Smart Switch software, the default values will be used. The default values are:
| Description | Default Value |
|
|
| Port Address | COM 2 |
|
|
| Baud Rate | 9600 |
|
|
| Data Bits | 8 Data Bits |
|
|
| Character Mode | 3 |
|
|
|
|
|
|
|
Documentation Number 232D4SS84502 Manual | 19 | |||
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
