B&B Electronics 3PCIOSD1A, 3PCIOSD1B manual Windows 2000 Professional

Windows 2000 Professional

This section covers device driver installation for

Windows 2000 Professional.

1.Configure the port on the PCI card to the desired RS- 232/422/485 mode using the jumpers.

2.Install the card in the slot, start the computer as an Administrator or ask your system administrator to install the software.

3.Windows will detect the PCI card and start Found New Hardware Wizard to begin driver installation. When installation is complete, Windows will set the hardware addressing & interrupt using the drivers and the Plug and Play function of the Operating System.

4.Installation will install one driver for the PCI Serial card, and a second driver which is used to assign a Com port to the card.

5. Click Next to continue.

6. Select Search, Click Next.

7. Insert the driver disk. Click Next.

Documentation Number 3PCIOSD1x-3903m Manual Chapter 3 21 22 Chapter 3 Documentation Number 3PCIOSD1x-3903m Manual

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104	B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445	B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445