Chapter 2: SETUP
Inspection
Your 3PCIOSD1x serial card was tested for proper operation before shipment. It should be in perfect mechanical and electrical condition upon receipt.
The card is normally
The data clock speed is set by one jumper to x1 (normal) operation or to x4 operation.
The operating mode of the card is set using 8 jumpers: 4 jumpers select
Refer to Jumper Mode Table in Appendix C.
CAUTION: ELECTROSTATIC SENSITIVE DEVICE
Use ESD precautions for safe handling.
Before removing the card from the
•Discharge any static electricity buildup on your body by touching a large grounded metal surface or the metal chassis on equipment connected to earth ground by a
•Avoid touching the gold connectors or other parts on the card except as necessary to set the configuration jumpers. After setting the jumpers, ground yourself to the computer chassis before and while inserting the card.
•Remove AC power from the computer and unplug the power cord before inserting the card.
•Retain the ESD bag for handling the card. Save the packaging for storage or shipping.
Figure 1. Silk Screen Plot of 3PCIOSD1x PCB
Documentation Number | Chapter 2 | 5 | 6 | Chapter 2 | Documentation Number |
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph |
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 | B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 |
