Using Console Mode
Manual Documentation Number: ESR90x-0508m Chapter 9 53
B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
C
Ch
ha
ap
pt
te
er
r
9
9:
:
U
US
SI
IN
NG
G
C
CO
ON
NS
SO
OL
LE
E
M
MO
OD
DE
E
Before the Serial Server is installed on a LAN the Console Mode can be
used to change the settings from the defaults. The Serial Server is shipped in
the RS-232 Mode. Connect a crossover (null modem) cable between the
COM port on the computer and the appropriate serial port on the Serial
Server.
N
No
ot
te
e:
:
See Chapter 5 for details of each Server Property Settings.
Console Mode Setup
Step 1: Apply power to the Serial Server. The power and ready LED will
light.
Step 2: Using a VT100 Terminal emulation program (typically
HyperTerminal in Windows) open the computer COM port
connected to the Serial Server (via an RS-232 crossover cable).
Step 3: In the HyperTerminal Port Settings window set:
o Baud rate: 9600
o Data bits: 8
o Parity: None
o Stop bits: 1
o Flow control: None
Click OK
Step 4: Ensure the Run/Console switch is in the Console position.
Step 5: To view the Configuration Menu, press the space bar. The menu
will appear within a few seconds.