Sylvania ZV450SL8 owner manual Delete, Press Setup to exit

CHANNEL SETTING

	ANALOG	DIGITAL
5	Select the channel number to add or	Select the channel number to delete.
	delete.	• Only the major channel is displayed in “Manual
	• Use [CH K / L] to cycle through only the	Preset” menu. (The channel number displayed
	memorized channels.	5 in the parenthesis is a virtual channel number)

• Use [{ / B] to cycle through all the channels	• Use [CH K / L] to cycle through only the
	memorized channels.
including the ones not memorized.
	• You cannot use [{ / B] for the digital TV
• Use [the Number buttons] to select a channel
	channel selection.
directly.
	• Use [the Number buttons] to select a channel
• When a memorized channel is selected, “Add”
	directly.
is checked and highlighted as a default.
	• When an unmemorized channel is selected
• When an unmemorized channel is selected,
	“Delete” is checked and highlighted as a
“Delete” is checked and highlighted as a
	default.
default.

Introduction Connections Basic Setup

6Use [K / L] to select “Add” or “Delete”, then press [ENTER].Manual Preset

CH 2

Add

Delete

Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.

7Press [SETUP] to exit.

6Use [K / L] to select “Delete”, then press [ENTER]. Then select the next channel to delete.

•If the setting is complete, press [RETURN ] to activate “Manual Preset”.

Manual Preset

DTV 2 (CH - - - )

Add

Delete

Your setting will be activated.

WARNING:

•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.

7Press [SETUP] to exit.

DiscFunction Management Recording Playback Editing Setup VCR Functions Others Español

EN 27