Repairing process MAY not work, Rec/Otr | Sylvania ZV450SL8 specs

TROUBLESHOOTING

Symptom

Remedy

“Repairing” appears on the TV screen.

• If there is a power failure or unplugging during recording, finalizing,

formatting or editing (even after “Repairing” disappears), a repairing

process will begin automatically just after turning the unit on again.

Repairing

It may take several minutes up to about several hours.

D In a case you intend to cancel the

• If you intend to cancel the repairing process, press [OPEN/CLOSE A]

V

repairing process.

on the front panel, then select “Yes” and press [ENTER]. After that, press

D

[OPEN/CLOSE A] to take out the disc. The disc canceled during the

Do you want to cancel a repairing process ?

repairing process MAY NOT work.

When selecting “Yes”, the disc may not be

usable.

Yes

No

Repairing

Picture noise appears.

• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”

(page 5).

• Adjust tracking control for better picture by pressing [CH K / L] while

you are playing back a cassette tape.

V

The cassette tape does not play back.

• No cassette tape is inserted.

C Recording does not start after you press

• Make sure the cassette tape has an erase-protection tab when you

R

[REC/OTR].

record to a cassette tape. If needed, cover the hole with cellophane

tape.

The remote control does not function.

• Check if a cassette tape is in this unit.

The motor rotates even when

• The motor may rotate for the duration of approximately 5 minutes for

playback / recording is stopped.

efficient operation. This is not a malfunction.

98 EN

Image 98

Sylvania ZV450SL8 OPEN/CLOSE a to take out the disc. The disc canceled during, Repairing process MAY not work, Rec/Otr

Contents

ZV450SL8 Make your contribution to the environment PrecautionsLaser Safety RADIO-TV Interference Precautions Introduction Avoid the Hazards of Electrical Shock and Fire Installation LocationSupplied Accessories Moisture Condensation Warning Cleaning discs Maintenance ServicingCleaning the cabinet Cleaning the disc lens Contents Features Features DVD-R Region Codes Unplayable DiscsColor Systems Logo Icon Files for playing back 21 2019 18 17 13 12 11 10 Functional OverviewFront Panel 11 10 Functional OverviewRear Panel Using a Remote Control Remote ControlInstalling the Batteries in the Remote Control Open the cover Insert batteries DTV/TV button DVD/VCR DB HDD Front Panel DisplayDisplay Message Current status of the unit Disconnect the power cord of your TV from the AC outlet Antenna Cable Connection Supplied cables used in this connection are as follows Plug in the power cords of the devices to the AC outletRF Modulator Connection With this setup Introduction Video OUT Connection to a TVThis unit Audio OUT DVD Video OUT Component Video Output Audio SettingConnection to AN Audio System Audio OUT Thevcr / DVD Recorder Switching VCR mode OFF Setup VCR Functions Others EspañolOn-Screen Display / Menu File Name Information DVD mode Disc Information / Menu Guide to ON-SCREEN Displays and Menus Disc Management Recording Playback Connections Basic SetupMain Menu Press Enter to activate Clock Initial SettingPress Power Air When scanning is over, press Setup to exit Channel SettingUse K / L to select Auto Preset, then press Enter Auto Channel Scan Adding / Deleting Channels Channel SettingUse K / L to select Manual Preset, then press Enter Press Setup to exit Delete Use K / L to select Auto Clock Setting, then press Enter Setting the ClockAuto Clock Setting Press Setup to exit and turn off the unit Daylight Saving Time Setting the ClockManual Clock Setting Channel Selection Tuner SettingsSwitching Analog Mode Digital Mode Selecting TV Audio Tuner SettingsFunction Editing Setup VCR Functions Others Español Press Audio to cycle through available audio languages SAP, then press Enter Selecting TV Audio cont’dUse K / L to select TV Audio Select, then press Enter Use K / L to select Stereo or Use K / L to select CC Style, then DTV Closed CaptionUse K / L to select Display, then press Enter Use K / L to select DTV CC, then Closed Caption Style Then press Enter Want to set, then press Enter Switch the setting for each item youUse K / L to select the item Formatting is completed.100% is indicated Formatting a DiscChoosing the Recording Format of a Brand-New DVD-RW Insert a brand-new disc. Formatting will start Use K / L to select Format, then press Enter Formatting a DiscReformatting a Disc Manually Use K / L to select Yes, then press Enter Press Setup to exit Setting for Auto ChapterSetting Aspect Ratio for Video Mode Recording Preparing a Disc To cancel the disc protect Setting a Disc to ProtectOFF ON, then press ENTER. e.g. VR mode DVD-RW Disc will be protected General Setting menu will appear Auto Finalizing Finalizing a Disc Press Setup Use K / L to select DVD Menu, then press EnterPlaying the Discs in Other DVD Players Use K / L to select Finalize, then press Enter 42 EN Restrictions on Recording Information on DVD RecordingRecording Speed Video Number buttons to select a desired Channel to record Press OPEN/CLOSE a to close the disc trayPress REC Speed to select a recording speed It may take awhile to load Disc completely Press REC/OTR to start recording Disc Connections Basic Setup Management RecordingPress Stop C to stop recording Playback Editing Timer Recording Use K / L to enter the date, then press B Timer Recording Will disappear on the front panel display To stop the timer recording in processPress T-SET VCR Functions Others Español Hints for Timer RecordingPriority of Overlapped Settings External device Settings for AN External DeviceConnection to an External Device If you want to use S-VIDEO in jack, select Video Press Stop C / Stop C/EJECT a on the unit to stop recording Settings for AN External DeviceRecording from an External Device It takes a while to load Disc Use K / L to select Recording, then press Enter Dubbing ModeUse K / L to select Dubbing Mode, then press Enter Make sure that the disc is recordable. Refer to Press Dubbing Dubbing ModePress DVD Press Stop C to stop the recording Structure of Disc Contents Information on Playback Direct Playback Some discs may start playback automatically Press Stop C once to stop playback Basic PlaybackPlayback from the Title List Use K / L to select Play From Or track/file, then press Enter Follow steps 1 to 2 in DirectPlayback on Press OPEN/CLOSE a to close Kodak Picture CD Using the Title / Disc MenuPause Fast Forward / Fast Reverse Playback Special PlaybackResume Playback Skipping TV Commercials During Playback Step by Step Playback Special PlaybackRapid Playback Slow Forward / Slow Reverse Playback DVD-video Marker SettingZoom Search Using Skip j / SkipUsing Display Title/Chapter Search Audio CD SearchTime Search Enter Repeat PlaybackRandom Playback 5Press Play B Program PlaybackSlide Show Switching Subtitles Switching Audio Soundtrack Reducing Block Noise Switching Virtual Surround SystemSwitching Camera Angles Information on Disc Editing Guide to a Title List Disc Management Recording Deleting TitlesAfter the disc is fully recorded Use K / L/ s / B to select a desired Deleting TitlesPress DVD first Title, then press Enter Use K / L to select Add To CREATING/DELETING PlaylistAdding Titles to a Playlist Playlist, then press Enter Erasing All Playlist Press DVD first. Press SetupCREATING/DELETING Playlist Use K / L to select Yes, then press ENTER.DVD Menu Editing Discs Putting Names on Titles Editing Discs Mode automaticallyPrevious input mode automatically Putting Names on Titles cont’d Use Skip H / G Setting or Clearing Chapter MarksDisc Connections Basic Setup Management Recording Playback Press Return Use K / L to select Scene Delete, then press Enter VR mode DVD-RW playlistDeleting a Part of a Title Cursor will move to Preview Part of the title is deleted Use K / L to select Delete then press EnterThen press Enter Press Return or Stop C to exit Dividing a TitlePress DVD first Stop mode, press TOP Menu Others Combining TitlesCombining, then press Enter Confirm the indication OFF ON. Press Enter again Setting or Releasing the Title ProtectionTo protect a whole disc VR mode DVD-RW only Press Return and then Return or Stop C to exit Use K / L to select the desired interval, then press Enter Setting or Clearing All Chapter Marks at OnceUse K / L to select Chapter Mark If you select OFF at , all the chapter marks are erased List of Settings Contents List of Settings Español Use K / L to select a desired item, then press Enter SetupsPlayback Press Stop C if you are playing back a disc Playback cont’d SetupsParental Lock Default All Function Audio Out Disc Menu Language Default EnglishAudio Language Default Original PCM Still Mode Default Auto Subtitle Language Default OFFAngle Icon Default on Refer to 1 to 5 on page 89 and set the selected item When you finish with setting, press Setup to exitDisplay For FL Dimmer Default Bright OSD Language Default EnglishScreen Saver Default 10 minutes Display cont’d Refer 1 to 2 on page 91 and set VideoSelected item For 3 , refer to Connection to an External Video cont’d Progressive Default OFFTV Aspect Default 43 Letter Box Select Yes again using K / L , then press Enter Reset AllSelect Yes using K / L , then press Enter Reset the setting to default Recording speed VCR FunctionsPress VCR first Before recording, make sure Press REC/OTR to begin the recording Using REC/OTR or Stop C One-touch Timer Recording OTRYou cannot pause the one-touch timer recording VCR Functions Other Operations Remedy TroubleshootingSymptom SET Press OPEN/CLOSE a TroubleshootingSymptom Remedy REC/OTR OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work Error message Cause Solution Frequently Asked Questions Language Code Language Code Glossary Recording SpecificationsGeneral Tuner Códigos de Región EspañolDiscos no Reproducibles Disco simple de video VSD Español Introduction Connections Presione DVD Presione PowerPresione Enter para activar Ajste Manual de Reloj Con el rótulo aupntando hacia arriba Temporizador Presione Timer ProgConfigure una programación del Presione Enter E9H10UD Customer ServiceTel 1VMN23497 Make the connection as illustrated below Plug in the power cords of the devices to the AC outletMake the basic connection as illustrated below DVD-VIDEO CD-DA CD-RW 3Press REC Speed to select a recording speed 6Press Stop C to stop recordingOpen the disc tray Start playing back 5Press REC/OTR to start recording