Sylvania ZV450SL8 Video cont’d, Progressive Default OFF, TV Aspect Default 43 Letter Box

SETUPS

Introduction

Video (cont’d)

1 Progressive (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON”, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect
Recording	Progressive
	Video Input
Clock	ON
	OFF
Channel
Reset All

2) Use [{ / B] to select “Yes”, then press [ENTER].

General Setting

Playback			scan:
Activating progressive
Display	TV has		Progressive
Check your		progressive scan
Video			TV Aspect
and connect	withProgressivecomponent video cable.
Rcording			Select Video
Clock	ON
Channel	OFF
NOTE :
Reset All
If there is no picture or picture is
distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

3)Use [K / L] to select “Yes” within 15 seconds, then press [ENTER].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 2” on page 18.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

2 TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a desired option, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect TV Aspect
Recording	Select Video
Clock	4:3 Letter Box
Channel	4:3 Pan & Scan
Reset All	16:9 Wide

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

DiscFunction Connections Basic Setup Management Recording Playback Editing Setup VCR Functions Others Español

EN 91