REAR PANEL
The rec eiver ’s bac k panel is or ganized into groups of inputs and outputs f or audio and video as shown below. See
back of this manual for an enlarged view.
1. AC fuse holder - Holds the AC Line fuse. Replace only with 12 Amp / 250 Volt Slow Blow fuse.
2. AC input receptacle - For attaching the supplied AC power cord to the receiver.
3. RS-232 input (optional) - For future interface applications.
4. Speaker outputs - Connections for your speakers.
Red binding posts
- speakers (+)
Black binding posts
- speakers (-)
5. Serial number - B&K Components, Ltd. serial number of your unit.
6. Antenna inputs - Connections for the AM and FM antennas.
7. Line inputs - connections from your audio/video sources.
Red RCA jacks
- right analog audio
White RCA jacks
- left analog audio
Yellow RCA jacks
- composite video
4 pin din jacks
- S-video
8. Line level outputs - Fixed level outputs to an audio or video recorder.
9. Zone outputs - Variable level outputs to your video monitors and external amplifiers.
10. IR in - Accepts input from external IR receptors. Connect an IR repeater (“home run”) to IR IN f or controlling
the receiver. This method of control is useful when the front IR receptor is blocked (for example, by a cabinet
door) or to control the receiver from another room. This input is typically used in place of an emitter attached to the
front panel.
11. Control outs - Outputs that allow you to remotely control external devices. (See “Making The Connection“).
12. Digital outputs - One optical and one 3.5 mm coaxial that carry digital information from the selected digital
input of the receiver out to digital recorders, personal computers, etc.
13. Surround outputs - Variable level outputs for driving external power amplifiers or powered speakers.
14. Digital inputs - Inputs used to connect a digital audio signal from your source to the receiver. The incoming
signal may be PCM, Dolby Digital (AC-3) or DTS (AVR202 only).
8p/n 12699 Rev. 9812C