B&K HT 70 manual Video Input Connections, Video Input Connection - HDMI

VIDEO INPUT CONNECTIONS 5

Composite

Source

S-Video

Source

Component

Source

HDMI Source

Video Input Connection - HDMI

The HDMI connection carries both audio and video, although it is possible on the B&K product to only output one or the other (please see the menu structure for further information). To connect an HDMI video source to the B&K, connect the HDMI cable to the HDMI output on the source piece. Then connect the other end of the cable into the corresponding HDMI input on the preamplifier. Shown is an HDMI output on the source piece going into Input 9 on the B&K.

Video Input Connection - Component Video

The B&K surround preamplifier provides eight sets of component video inputs. Each component input corresponds to a set of stereo analog inputs, optical digital inputs and coax digital inputs. For example, Component video input 1 would correspond to Analog Stereo input 1, Optical digital input 1 and Coax digital input 1. The standard component video output would upconvert the input video sig- nal to 720P, 1080i or 1080P depending on the menu selection. Under default configuration the output is set to 1080i. Shown above is a component video source going into Input 1 on the B&K.

Video Input Connection - S-Video

The B&K surround preamplifier provides eight sets of component video inputs. These inputs can be used with the S-Video to RCA adapter that is supplied with the preamplifier in order to upconvert an S-Video signal to go into the component input. Connect the one end of the S-Video to RCA adapter to the S-Video output on the source piece. Then connect RCA cables from the adapter to the corre- sponding colored inputs on the B&K. Shown is an S-Video source connected to the S-Video to RCA adapter with RCA connections going into the blue and green inputs on Input 3.

Video Input Connection - Composite Video

The B&K surround preamplifier provides eight sets of component video inputs. These inputs can be used to upconvert a composite video signal to go into the component input. Connect the composite video output on the source piece using an RCA cable to the red colored input on the B&K. Shown is a composite video source with an RCA connection going into the red input on Input 1.