TO ENSURE SAFE OPERATION OF YOUR BACKPACK, PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USAGE
ASSEMBLY
* Remove Backpack from box. The Backpack comes fully assembled and ready to use, except for canopy.
UNFOLDING BACKPACK
* Pull apart both front and rear frame tubes until locks into place. See figure 1. Pull outward on rear frame tube. See figure 2. Pull up on seat frame until locks into place. See figure 3. Push headrest back until locks into place. See figure 4.
FITTING THE BACKPACK
* The Backpack should be fitted to each user individually. The fitting process should be performed without the child in the Backpack. Place weight in the Backpack, using books or other heavy material, to obtain a more comfortable fit.
* Place the Backpack on your back and position the waist strap across the front of your hip bone points. The buckle should be approximately over your belly button. Tighten the waist strap until snug.
* Tighten the shoulder straps by pulling downward on the shoulder strap webbing. The shoulder straps should lie smoothly over your shoulders. See figure 5.
* Tighten the load lifter straps by pulling downward on the lifter webbing. The lifter straps help redistribute the weight of the Backpack from the top of your shoulders to the waist belt. Tighten the lifter straps until the weight is evenly and comfortably distributed, approximately 20% of the load on the shoulders and 80% of the load on the waist. See figure 6.
* Connect the sternum straps together by inserting the male buckle fitting into the female fitting. The sternum strap helps stabilize the Backpack by tying the shoulder straps together. Tighten the sternum strap until comfortable. See figure 7.
Fig. 7 | Fig. 6 | Fig. 5 |
|
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3
